Our standard series Hydraulic jack plates have been on the market since 1978 and are a proven unit.  They have been redesigned, but the concept has remained.  The lightest weight hydraulic jack plate on the market!  The standard series belief is to keep the least amount of weight on the transom, and by keeping the pump inside the boat, keeps this weight down.  All standard series jack plates have a lifetime warranty on the structure to the original end user, and a 5 year warranty on the hydraulic pump motor.

Jack plates are used to improve an outboard boats speed, hole shot, fuel efficiency, and the boater navigate in shallow waters.  To help find the correct setback for your boat, give us a call!  1-813-247-7040

Offered in 4″, 6″, 8″, 10″, 12″,14″ & 16″ setbacks, Bob’s Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.

Standard series support motors up to a 14.5″ mounting width.  If wider we recommend our Extreme Gen 3 series jack plates.

• Pump inside boat

• Improves fuel efficiency

• Large powerful motor that can lift heavy outboards under full power

• Lifetime warranty on structure, 5 years on pump to original end user

• Automotive grease nipples for easy lubrication

• Tension rods

• Made in USA, in our own factory in Tampa, Florida

• Rated for 300HP, upto 625 lbs motors (heavier should use Extreme series)

• Factory installed holeshot plate on 8+” Setback models

All models are manufactured with aluminum and stainless steel. The Minimum Lift Above Standard Transom is 7-1/2″.(1-½” built in. 6″ rise)
*Price includes complete package (lift, controls, pump, switch, hoses, instructions, oil and limited LIFETIME structural workmanship warranty.
Warranty on the pump (against defects of quality and workmanship) is 60 months. LONGEST IN THE INDUSTRY.    Wire harness and solenoids warranty is 12 months.

The post 16″ Setback Standard Series Jack Plate 300hp first appeared on Bob's Machine.

RACE-FISH-PLAY

Bob’s Machine Shop’s new hydraulic jack plate line, “Action Series Jack Plate”, offers new technology in the Jack Plate market.  The first Bob’s Jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat.  This is a great OEM feature to help save time in rigging.

The new internal pump has a motor stronger than any other internal jack plate on the market currently, which will offer greater lifting speed, and strength with heavy outboards.  All of the Bob’s patented features from our standard series, automotive style grease nipples in the side rails, tension rods, and the famous Bob’s Machine Shop Design, are all incorporated into the Action Series Jack Plate.

Offered in 4″, 6″, 8″, 10″, 12″, 14″ & 16″ setbacks, Bob’s Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.

Action series support motors up to a 14.5″ mounting width.  If wider we recommend our Extreme Gen 3 series jack plates.

•  Pump inside jack plate
• Factory installed holeshot plate on 8+” Setback models
• Large powerful motor that can lift heavy outboards under full power
• 1.5″ of lift built into structure & 6″ of adjustable travel for a total of 7.5″ total lift
• Can be converted to have pump inside boat if owner desires to change styles
• Automotive grease nipples for easy lubrication
• Tension rods
• Made in USA, in our own factory in Tampa, Florida
• Rated for 300HP, up to 625 lbs motors (heavier should use Extreme series)
• Includes Jack plate, wiring harness, relays, rocker style switch
•  Limited Lifetime Structure Warranty against manufacturing defects
•  3 Year Action Pump Warranty

The post 16″ Setback Action Series Jack Plate first appeared on Bob's Machine.

RACE-FISH-PLAY

Bob’s Machine Shop’s new hydraulic jack plate line, “Action Series Jack Plate”, offers new technology in the Jack Plate market.  The first Bob’s Jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat.  This is a great OEM feature to help save time in rigging.

The new internal pump has a motor stronger than any other internal jack plate on the market currently, which will offer greater lifting speed, and strength with heavy outboards.  All of the Bob’s patented features from our standard series, automotive style grease nipples in the side rails, tension rods, and the famous Bob’s Machine Shop Design, are all incorporated into the Action Series Jack Plate.

Offered in 4″, 6″, 8″, 10″, 12″ and 14″ setbacks, Bob’s Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.

Action series support motors up to a 14.5″ mounting width.  If wider we recommend our Extreme Gen 3 series jack plates.

• Pump inside jack plate
• 1.5″ of lift built into structure & 6″ of adjustable travel for a total of 7.5″ total lift
• Large powerful motor that can lift heavy outboards under full power
• Can be converted to have pump inside boat if owner desires to change styles
• Automotive grease nipples for easy lubrication
• Tension rods
• Made in USA, in our own factory in Tampa, Florida
• Rated for 300HP, up to 625 lbs motors (heavier should use Extreme series)
• Pre drilled for dual side mount Power Pole brackets.
• Includes Jack plate, wiring harness, relays, rocker style switch
• Limited Lifetime Structure Warranty against manufacturing defects
• 3 Year Action Pump Warranty

The post 4″ Setback Action Series Jack Plate first appeared on Bob's Machine.

Ultra Extreme series jack plate for 700HP motors.

This unit has been beefed up to handle the extreme forces of the worlds most powerful outboards.

Wider unit to handle width of the Mercury 600 V12

4″ Setback, with Mercury Marine’s 600HP V12 custom mounting hole pattern & BIA bolt pattern with double top bolts so can be used for multiple large engine applications including Oxe & Cox diesels, Yamaha 425, & all other BIA pattern motors.

Remote mount pump w/flow divider included.

Call for more info/details.  813-247-7040

The post 700 HP Ultra Extreme plate first appeared on Bob's Machine.

RACE-FISH-PLAY

This is specifically for Basscat boat, this jack plate has 8″ of setback and the Basscat 6 bolt hole pattern and machined top for the rubrail.

Bob’s Machine Shop’s new hydraulic jack plate line, “Action Series Jack Plate”, offers new technology in the Jack Plate market.  The first Bob’s Jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat.  This is a great OEM feature to help save time in rigging.

The new internal pump has a motor stronger than any other internal jack plate on the market currently, which will offer greater lifting speed, and strength with heavy outboards.  All of the Bob’s patented features from our standard series, automotive style grease nipples in the side rails, tension rods, and the famous Bob’s Machine Shop Design, are all incorporated into the Action Series Jack Plate.

Offered in 8″ setback, Bob’s Jack plates are 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.

Action series support motors up to a 14.5″ mounting width.  If wider we recommend our Extreme Gen 3 series jack plates.

•  Pump inside jack plate
• 6″ of adjustable travel
• Large powerful motor that can lift heavy outboards under full power
• Lifetime warranty on structure
• Can be converted to have pump inside boat if owner desires to change styles
• Automotive grease nipples for easy lubrication
• Tension rods
• Made in USA, in our own factory in Tampa, Florida
• Rated for 300HP, up to 625 lbs motors (heavier should use Extreme series)
• Pre drilled for dual side mount shallow water anchor brackets.
• Includes Jack plate, wiring harness, relays, rocker style switch, Limited Lifetime Structure Warranty against manufacturing defects, 3 Year Action Pump Warranty

The post Basscat 8″ Setback Action Series Jack Plate first appeared on Bob's Machine.

RACE-FISH-PLAY

Bob’s Machine Shop’s new hydraulic jack plate line, “Action Series Jack Plate”, offers new technology in the Jack Plate market.  The first Bob’s Jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat.  This is a great OEM feature to help save time in rigging.

The new internal pump has a motor stronger than any other internal jack plate on the market currently, which will offer greater lifting speed, and strength with heavy outboards.  All of the Bob’s patented features from our standard series, automotive style grease nipples in the side rails, tension rods, and the famous Bob’s Machine Shop Design, are all incorporated into the Action Series Jack Plate.

Offered in 4″, 6″, 8″, 10″, 12″ and 14″ setbacks, Bob’s Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.

Action series support motors up to a 14.5″ mounting width.  If wider we recommend our Extreme Gen 3 series jack plates.

•  Pump inside jack plate
• Large powerful motor that can lift heavy outboards under full power
• 1.5″ of lift built into structure & 6″ of adjustable travel for a total of 7.5″ total lift
• Can be converted to have pump inside boat if owner desires to change styles
• Automotive grease nipples for easy lubrication
• Tension rods
• Made in USA, in our own factory in Tampa, Florida
• Rated for 300HP, up to 625 lbs motors (heavier should use Extreme series)
• Pre drilled for dual side mount Power Pole brackets.
• Includes Jack plate, wiring harness, relays, rocker style switch
• Limited Lifetime Structure Warranty against manufacturing defects
• 3 Year Action Pump Warranty

The post 6″ Setback Action Series Jack Plate first appeared on Bob's Machine.

RACE-FISH-PLAY

Bob’s Machine Shop’s new hydraulic jack plate line, “Action Series Jack Plate”, offers new technology in the Jack Plate market.  The first Bob’s Jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat.  This is a great OEM feature to help save time in rigging.

The new internal pump has a motor stronger than any other internal jack plate on the market currently, which will offer greater lifting speed, and strength with heavy outboards.  All of the Bob’s patented features from our standard series, automotive style grease nipples in the side rails, tension rods, and the famous Bob’s Machine Shop Design, are all incorporated into the Action Series Jack Plate.

Offered in 4″, 6″, 8″, 10″, 12″ and 14″ setbacks, Bob’s Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.

Action series support motors up to a 14.5″ mounting width.  If wider we recommend our Extreme Gen 3 series jack plates.

•  Pump inside jack plate
• Factory installed holeshot plate on 8+” Setback models
• Large powerful motor that can lift heavy outboards under full power
• 1.5″ of lift built into structure & 6″ of adjustable travel for a total of 7.5″ total lift
• Can be converted to have pump inside boat if owner desires to change styles
• Automotive grease nipples for easy lubrication
• Tension rods
• Made in USA, in our own factory in Tampa, Florida
• Rated for 300HP, up to 625 lbs motors (heavier should use Extreme series)
• Pre drilled for dual side mount Power Pole brackets.
• Includes Jack plate, wiring harness, relays, rocker style switch
• Limited Lifetime Structure Warranty against manufacturing defects
• 3 Year Action Pump Warranty

The post 8″ Setback Action Series Jack Plate first appeared on Bob's Machine.

RACE-FISH-PLAY

Bob’s Machine Shop’s new hydraulic jack plate line, “Action Series Jack Plate”, offers new technology in the Jack Plate market.  The first Bob’s Jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat.  This is a great OEM feature to help save time in rigging.

The new internal pump has a motor stronger than any other internal jack plate on the market currently, which will offer greater lifting speed, and strength with heavy outboards.  All of the Bob’s patented features from our standard series, automotive style grease nipples in the side rails, tension rods, and the famous Bob’s Machine Shop Design, are all incorporated into the Action Series Jack Plate.

Offered in 4″, 6″, 8″, 10″, 12″ and 14″ setbacks, Bob’s Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.

Action series support motors up to a 14.5″ mounting width.  If wider we recommend our Extreme Gen 3 series jack plates.

•  Pump inside jack plate
• Factory installed holeshot plate on 8+” Setback models
• Large powerful motor that can lift heavy outboards under full power
• 1.5″ of lift built into structure & 6″ of adjustable travel for a total of 7.5″ total lift
• Can be converted to have pump inside boat if owner desires to change styles
• Automotive grease nipples for easy lubrication
• Tension rods
• Made in USA, in our own factory in Tampa, Florida
• Rated for 300HP, up to 625 lbs motors (heavier should use Extreme series)
• Pre drilled for dual side mount Power Pole brackets.
• Includes Jack plate, wiring harness, relays, rocker style switch
•  Limited Lifetime Structure Warranty against manufacturing defects
•  3 Year Action Pump Warranty

The post 10″ Setback Action Series Jack Plate first appeared on Bob's Machine.

RACE-FISH-PLAY

Bob’s Machine Shop’s new hydraulic jack plate line, “Action Series Jack Plate”, offers new technology in the Jack Plate market.  The first Bob’s Jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat.  This is a great OEM feature to help save time in rigging.

The new internal pump has a motor stronger than any other internal jack plate on the market currently, which will offer greater lifting speed, and strength with heavy outboards.  All of the Bob’s patented features from our standard series, automotive style grease nipples in the side rails, tension rods, and the famous Bob’s Machine Shop Design, are all incorporated into the Action Series Jack Plate.

Offered in 4″, 6″, 8″, 10″, 12″ and 14″ setbacks, Bob’s Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.

Action series support motors up to a 14.5″ mounting width.  If wider we recommend our Extreme Gen 3 series jack plates.

•  Pump inside jack plate
• Factory installed holeshot plate on 8+” Setback models
• Large powerful motor that can lift heavy outboards under full power
• 1.5″ of lift built into structure & 6″ of adjustable travel for a total of 7.5″ total lift
• Can be converted to have pump inside boat if owner desires to change styles
• Automotive grease nipples for easy lubrication
• Tension rods
• Made in USA, in our own factory in Tampa, Florida
• Rated for 300HP, up to 625 lbs motors (heavier should use Extreme series)
• Pre drilled for dual side mount Power Pole brackets.
• Comes with Standard Splash Pan, but can be upgraded to Performance Hole Shot model
• Includes Jack plate, wiring harness, relays, rocker style switch
• Limited Lifetime Structure Warranty against manufacturing defects
• 3 Year Action Pump Warranty

The post 12″ Setback Action Series Jack Plate first appeared on Bob's Machine.

RACE-FISH-PLAY

Bob’s Machine Shop’s new hydraulic jack plate line, “Action Series Jack Plate”, offers new technology in the Jack Plate market.  The first Bob’s Jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat.  This is a great OEM feature to help save time in rigging.

The new internal pump has a motor stronger than any other internal jack plate on the market currently, which will offer greater lifting speed, and strength with heavy outboards.  All of the Bob’s patented features from our standard series, automotive style grease nipples in the side rails, tension rods, and the famous Bob’s Machine Shop Design, are all incorporated into the Action Series Jack Plate.

Offered in 4″, 6″, 8″, 10″, 12″ and 14″ setbacks, Bob’s Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.

Action series support motors up to a 14.5″ mounting width.  If wider we recommend our Extreme Gen 3 series jack plates.

•  Pump inside jack plate
• Factory installed holeshot plate on 8+” Setback models
• Large powerful motor that can lift heavy outboards under full power
• 1.5″ of lift built into structure & 6″ of adjustable travel for a total of 7.5″ total lift
• Can be converted to have pump inside boat if owner desires to change styles
• Automotive grease nipples for easy lubrication
• Tension rods
• Made in USA, in our own factory in Tampa, Florida
• Rated for 300HP, up to 625 lbs motors (heavier should use Extreme series)
• Includes Jack plate, wiring harness, relays, rocker style switch
•  Limited Lifetime Structure Warranty against manufacturing defects
•  3 Year Action Pump Warranty

The post 14″ Setback Action Series Jack Plate first appeared on Bob's Machine.