Bob’s Machine Shop’s Versa Jac jack plate line, offers new technology in the Jack Plate market.  The first & only jack plate to offer an upgrade kit for boaters to convert to Hydraulic at a later date!

Made of high-quality, aircraft-grade aluminum, the patent pending Versajac has the same look as Bob’s popular line of hydraulic jacks. It is rated for engines up to 300 hp and is available in 4″, 6″, 8″, 10″, 12″, 14″ & 16″ setbacks as well as our mini jack plate line. Adjusting the jack plate for optimum results is easily done while the boat is in the water. When it’s time to upgrade from manual to all-hydraulic operation, converting the jack is simple. Using a few basic hand tools, remove the Versajac’s manual screw assembly and swap it out for the new hydraulic cylinder kit. Then install the pump inside the boat. All BMS’s hydraulic pumps are designed to mount inside for longevity and protection from the elements. Jack plates have “limited lifetime warranty” and pumps have a 5 year warranty (excluding water damage).

Bob’s Versa Jac,  Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.

• Lifetime warranty on structure

• Can be converted to Hydraulic if owner desires to change styles

• Automotive grease nipples for easy lubrication

• Tension rods

• Made in USA, in our own factory in Tampa, Florida

• Rated for 300HP, upto 625 lbs motors (heavier should use Extreme series)

• predrilled for side mount shallow water anchors

The post 16″ heavy duty Setback Versa Series Jack Plate (300 hp max) first appeared on Bob's Machine.

Upgrade your Versa Jac to a Action Series Jack plate.

Kit includes:

ACTION SERIES Electro-hydraulic pump, Clevis Bracket, Bottom Bar, Travel Stop Kit, switch, wiring and all necessary hardware is included.

This will work with 6, 8, 10, 12, 14 inch Versa jacs, and Standard, Extreme Gen 2 & Mini versa jacks.

4″ can only be upgraded to std series at this time.

The post Versa Upgrade Kit – Turn into Action series first appeared on Bob's Machine.

Upgrade your Versa Jac to a standard Jack plate.

Kit includes:

Hydraulic Pump, Rigging Kit, Hydraulic Cylinder, Clevis Bracket, Bottom Bar, Travel Stop Kit, and all necessary hardware is included.

Please select which Versa Jac upgrade kit you would like from the above drop down menu.

The post Versa Upgrade Kit – Turn into Standard series first appeared on Bob's Machine.

Bob’s Machine Shop’s Versa Jac jack plate line, offers new technology in the Jack Plate market.  The first & only jack plate to offer an upgrade kit for boaters to convert to Hydraulic at a later date!

Made of high-quality, aircraft-grade aluminum, the patent pending Versajac has the same look as Bob’s popular line of hydraulic jacks. It is rated for engines up to 300 hp and is available in 4″, 6″, 8″, 10″, 12″ & 14″ setbacks as well as our mini jack plate line. Adjusting the jackplate for optimum results is easily done while the boat is in the water. When it’s time to upgrade from manual to all-hydraulic operation, converting the jack is simple. Using a few basic hand tools, remove the Versajac’s manual screw assembly and swap it out for the new hydraulic cylinder kit. Then install the pump inside the boat. All BMS’s hydraulic pumps are designed to mount inside for longevity and protection from the elements. Jack plates have “limited lifetime warranty” and pumps have a 5 year warranty (excluding water damage).

Bob’s Versa Jac,  Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.

• Lifetime warranty on structure

• Can be converted to Hydraulic if owner desires to change styles

• Automotive grease nipples for easy lubrication

• Tension rods

• Made in USA, in our own factory in Tampa, Florida

• Rated for 300HP, upto 625 lbs motors (heavier should use Extreme series)

• Pre drilled for dual side mount Power Pole brackets.

• Comes with Standard Splash Pan, but can be upgraded to Performance Hole Shot model

The post 12″ Setback Versa Series Jack Plate (300 hp max) first appeared on Bob's Machine.

Bob’s Machine Shop’s Versa Jac jack plate line, offers new technology in the Jack Plate market.  The first & only jack plate to offer an upgrade kit for boaters to convert to Hydraulic at a later date!

Made of high-quality, aircraft-grade aluminum, the patent pending Versajac has the same look as Bob’s popular line of hydraulic jacks. It is rated for engines up to 300 hp and is available in 4″, 6″, 8″, 10″, 12″ & 14″ setbacks as well as our mini jack plate line. Adjusting the jackplate for optimum results is easily done while the boat is in the water. When it’s time to upgrade from manual to all-hydraulic operation, converting the jack is simple. Using a few basic hand tools, remove the Versajac’s manual screw assembly and swap it out for the new hydraulic cylinder kit. Then install the pump inside the boat. All BMS’s hydraulic pumps are designed to mount inside for longevity and protection from the elements. Jack plates have “limited lifetime warranty” and pumps have a 5 year warranty (excluding water damage).

Bob’s Versa Jac,  Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.

• Lifetime warranty on structure

• Can be converted to Hydraulic if owner desires to change styles

• Automotive grease nipples for easy lubrication

• Tension rods

• Made in USA, in our own factory in Tampa, Florida

• Rated for 300HP, upto 625 lbs motors (heavier should use Extreme series)

• Pre drilled for dual side mount Power Pole brackets.

The post 10″ Setback Versa Series Jack Plate (300 hp max) first appeared on Bob's Machine.

Bob’s Machine Shop’s Versa Jac jack plate line, offers new technology in the Jack Plate market.  The first & only jack plate to offer an upgrade kit for boaters to convert to Hydraulic at a later date!

Made of high-quality, aircraft-grade aluminum, the patent pending Versajac has the same look as Bob’s popular line of hydraulic jacks. It is rated for engines up to 300 hp and is available in 4″, 6″, 8″, 10″, 12″ & 14″ setbacks as well as our mini jack plate line. Adjusting the jackplate for optimum results is easily done while the boat is in the water. When it’s time to upgrade from manual to all-hydraulic operation, converting the jack is simple. Using a few basic hand tools, remove the Versajac’s manual screw assembly and swap it out for the new hydraulic cylinder kit. Then install the pump inside the boat. All BMS’s hydraulic pumps are designed to mount inside for longevity and protection from the elements. Jack plates have “limited lifetime warranty” and pumps have a 5 year warranty (excluding water damage).

Bob’s Versa Jac,  Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.

• Lifetime warranty on structure

• Can be converted to Hydraulic if owner desires to change styles

• Automotive grease nipples for easy lubrication

• Tension rods

• Made in USA, in our own factory in Tampa, Florida

• Rated for 300HP, upto 625 lbs motors (heavier should use Extreme series)

• Pre drilled for dual side mount Power Pole brackets.

The post 6″ heavy duty Setback Versa Series Jack Plate (300 hp max) first appeared on Bob's Machine.

Bob’s Machine Shop’s Versa Jac jack plate line, offers new technology in the Jack Plate market.  The first & only jack plate to offer an upgrade kit for boaters to convert to Hydraulic at a later date!

Made of high-quality, aircraft-grade aluminum, the patent pending Versajac has the same look as Bob’s popular line of hydraulic jacks. It is rated for engines up to 300 hp and is available in 4″, 6″, 8″, 10″, 12″ & 14″ setbacks as well as our mini jack plate line. Adjusting the jackplate for optimum results is easily done while the boat is in the water. When it’s time to upgrade from manual to all-hydraulic operation, converting the jack is simple. Using a few basic hand tools, remove the Versajac’s manual screw assembly and swap it out for the new hydraulic cylinder kit. Then install the pump inside the boat. All BMS’s hydraulic pumps are designed to mount inside for longevity and protection from the elements. Jack plates have “limited lifetime warranty” and pumps have a 5 year warranty (excluding water damage).

Bob’s Versa Jac,  Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.

• Lifetime warranty on structure

• Can be converted to Hydraulic if owner desires to change styles

• Automotive grease nipples for easy lubrication

• Tension rods

• Made in USA, in our own factory in Tampa, Florida

• Rated for 300HP, upto 625 lbs motors (heavier should use Extreme series)

• Pre drilled for dual side mount Power Pole brackets.

The post 8″ heavy duty Setback Versa Series Jack Plate (300 hp max) first appeared on Bob's Machine.

Bob’s Machine Shop’s Versa Jac jack plate line, offers new technology in the Jack Plate market.  The first & only jack plate to offer an upgrade kit for boaters to convert to Hydraulic at a later date!

Made of high-quality, aircraft-grade aluminum, the patent pending Versajac has the same look as Bob’s popular line of hydraulic jacks. It is rated for engines up to 300 hp and is available in 4″, 6″, 8″, 10″, 12″ & 14″ setbacks as well as our mini jack plate line. Adjusting the jack plate for optimum results is easily done while the boat is in the water. When it’s time to upgrade from manual to all-hydraulic operation, converting the jack is simple. Using a few basic hand tools, remove the Versajac’s manual screw assembly and swap it out for the new hydraulic cylinder kit. Then install the pump inside the boat. All BMS’s hydraulic pumps are designed to mount inside for longevity and protection from the elements. Jack plates have “limited lifetime warranty” and pumps have a 5 year warranty (excluding water damage).

Bob’s Versa Jac,  Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.

• Lifetime warranty on structure

• Can be converted to Hydraulic if owner desires to change styles

• Automotive grease nipples for easy lubrication

• Tension rods

• Made in USA, in our own factory in Tampa, Florida

• Rated for 300HP, upto 625 lbs motors (heavier should use Extreme series)

• predrilled for side mount shallow water anchors

The post 14″ heavy duty Setback Versa Series Jack Plate (300 hp max) first appeared on Bob's Machine.

Bob’s Machine Shop’s Versa Jac jack plate line, offers new technology in the Jack Plate market.  The first & only jack plate to offer an upgrade kit for boaters to convert to Hydraulic at a later date!

Made of high-quality, aircraft-grade aluminum, the patent pending Versajac has the same look as Bob’s popular line of hydraulic jacks. It is rated for engines up to 300 hp and is available in 4″, 6″, 8″, 10″, 12″ & 14″ setbacks as well as our mini jack plate line. Adjusting the jack plate for optimum results is easily done while the boat is in the water. When it’s time to upgrade from manual to all-hydraulic operation, converting the jack is simple. Using a few basic hand tools, remove the Versajac’s manual screw assembly and swap it out for the new hydraulic cylinder kit. Then install the pump inside the boat. All BMS’s hydraulic pumps are designed to mount inside for longevity and protection from the elements. Jack plates have “limited lifetime warranty” and pumps have a 5 year warranty.

Versa series support motors up to a 14.5″ mounting width.  If wider we recommend our Extreme Gen 3 Versa series jack plates.

Bob’s Versa Jac,  Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.

• Lifetime warranty on structure

• Can be converted to Hydraulic if owner desires to change styles

• Automotive grease nipples for easy lubrication

• Tension rods

• Made in USA, in our own factory in Tampa, Florida

• Rated for 300HP, up to 625 lbs motors (heavier should use Extreme series)

• Pre drilled for dual side mount Power Pole brackets.

The post 4″ heavy duty Setback Versa Series Jack Plate (300 hp max) first appeared on Bob's Machine.