Please note – on the the colored units are just to show color!  Multiple sizes shown.

The first race specific jack plate from Bob’s, and the first ever race specific vertical lift jack plate with Hydraulic options!

Standard series – Remote mount pump with hoses – 6″ Adjustable travel

Versa series – Manual screw jack – 6″ Adjustable travel

Transom side plate with patent pending interlocking system to the side rails.  Machined excess material off of plate to save weight!

The post 12″ Race Series Jack Plate first appeared on Bob's Machine.

Please note – on the the colored units are just to show color!  Multiple sizes shown.

The first race specific jack plate from Bob’s, and the first ever race specific vertical lift jack plate with Hydraulic options!

Standard series – Remote mount pump with hoses – 6″ Adjustable travel

Versa series – Manual screw jack – 6″ Adjustable travel

Transom side plate with patent pending interlocking system to the side rails.  Machined excess material off of plate to save weight!

The post 10″ Race Series Jack Plate first appeared on Bob's Machine.

Please note – on the the colored units are just to show color!  Multiple sizes shown.

The first race specific jack plate from Bob’s, and the first ever race specific vertical lift jack plate with Hydraulic options!

Standard series – Remote mount pump with hoses – 6″ Adjustable travel

Versa series – Manual screw jack – 6″ Adjustable travel

Transom side plate with patent pending interlocking system to the side rails.  Machined excess material off of plate to save weight!

The post 8″ Race Series Jack Plate first appeared on Bob's Machine.

Please note – on the the colored units are just to show color!  Multiple sizes shown.

The first race specific jack plate from Bob’s, and the first ever race specific vertical lift jack plate with Hydraulic options!

Standard series – Remote mount pump with hoses – 6″ Adjustable travel

Versa series – Manual screw jack – 6″ Adjustable travel

Transom side plate with patent pending interlocking system to the side rails.  Machined excess material off of plate to save weight!

The post 6″ Race Series Jack Plate first appeared on Bob's Machine.

Silver aluminum color standard, Anodized colors available for upcharge.  Please note – on the 4″ page – the colored units are just to show color!

The first race specific jack plate from Bob’s, and the first ever race specific vertical lift jack plate with Hydraulic options!

Standard series – Remote mount pump with hoses – 6″ Adjustable travel

Versa series – Manual screw jack – 6″ Adjustable travel

Transom side plate with patent pending interlocking system to the side rails.  Machined excess material off of plate to save weight!

The post 4″ Race Series Jack Plate first appeared on Bob's Machine.

Bob’s Machine Shop’s Versa Jac jack plate line, offers new technology in the Jack Plate market.  The first & only jack plate to offer an upgrade kit for boaters to convert to Hydraulic at a later date!

Made of high-quality, aircraft-grade aluminum, the patent pending Versajac has the same look as Bob’s popular line of hydraulic jacks. It is rated for engines up to 300 hp and is available in 4″, 6″, 8″, 10″, 12″, 14″ & 16″ setbacks as well as our mini jack plate line. Adjusting the jack plate for optimum results is easily done while the boat is in the water. When it’s time to upgrade from manual to all-hydraulic operation, converting the jack is simple. Using a few basic hand tools, remove the Versajac’s manual screw assembly and swap it out for the new hydraulic cylinder kit. Then install the pump inside the boat. All BMS’s hydraulic pumps are designed to mount inside for longevity and protection from the elements. Jack plates have “limited lifetime warranty” and pumps have a 5 year warranty (excluding water damage).

Bob’s Versa Jac,  Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.

• Lifetime warranty on structure

• Can be converted to Hydraulic if owner desires to change styles

• Automotive grease nipples for easy lubrication

• Tension rods

• Made in USA, in our own factory in Tampa, Florida

• Rated for 300HP, upto 625 lbs motors (heavier should use Extreme series)

• predrilled for side mount shallow water anchors

The post 16″ heavy duty Setback Versa Series Jack Plate (300 hp max) first appeared on Bob's Machine.

Bob’s Machine Shop has re engineered their world famous Versa jack for new 550hp 1000LBS engines including V10’s.

New wider design accommodates the Verado’s wider mounting bracket.

Through innovative engineering, BMS’s new Extreme Gen3 Versa Series (TM) jack plates are their strongest yet. Adjusting the jack plate for optimum results is easily done while the boat is in the water.  Jack plates have “limited lifetime warranty”.

The Extreme Versa series jack plates are available in 2, 4, 6, 8, 10 & 12″  setbacks to suit every application.

Jack plates are no longer just for fishing boats, offshore boaters will enjoy the extra speed, and increased fuel economy from BMS’s new line. Jack plates are used to improve an outboard boats speed, hole shot, fuel efficiency, and the boater navigate in shallow waters.  To help find the correct setback for your boat, give us a call!  1-813-247-7040

The post 2″ Extreme Gen 3 Versa Jac first appeared on Bob's Machine.

Bob’s Machine Shop has re engineered their world famous Versa jack for new 550+hp 1000LBS engines including V8’s. Bob’s Machine Shop’s Extreme Versa Jac jack plate line, offers new technology in the Jack Plate market.  The first & only jack plate to offer an upgrade kit for boaters to convert to Hydraulic at a later date!

New wider design accommodates the Verado’s wider mounting bracket.

Through innovative engineering, BMS’s new Extreme Gen3 Versa Series (TM) jack plates are their strongest yet. Adjusting the jackplate for optimum results is easily done while the boat is in the water. When it’s time to upgrade from manual to all-hydraulic operation, converting the jack is simple. Using a few basic hand tools, remove the Versajac’s manual screw assembly and swap it out for the new hydraulic cylinder kit. Then install the pump inside the boat. All BMS’s hydraulic pumps are designed to mount inside for longevity and protection from the elements. Jack plates have “limited lifetime warranty”.

The Extreme Versa series jack plates are available in 4, 6, 8, 10 & 12″  setbacks to suit every application.

Predrilled for side mount shallow water anchors.

Jack plates are no longer just for fishing boats, offshore boaters will enjoy the extra speed, and increased fuel economy from BMS’s new line. Jack plates are used to improve an outboard boats speed, holeshot, fuel efficiency, and the boater navigate in shallow waters.  To help find the correct setback for your boat, give us a call!  1-855-JACKPLATE

The post 12″ Extreme Gen 3 Versa Jac first appeared on Bob's Machine.

Bob’s Machine Shop has re engineered their world famous Versa jack for new 550+hp 1000LBS engines including V8’s. Bob’s Machine Shop’s Extreme Versa Jac jack plate line, offers new technology in the Jack Plate market.  The first & only jack plate to offer an upgrade kit for boaters to convert to Hydraulic at a later date!

Extreme jack plates are wider for Verado & Yamaha F-series with integrated steering.

Through innovative engineering, BMS’s new Extreme Gen3 Versa Series (TM) jack plates are their strongest yet. Adjusting the jack plate for optimum results is easily done while the boat is in the water. When it’s time to upgrade from manual to all-hydraulic operation, converting the jack is simple. Using a few basic hand tools, remove the Versajac’s manual screw assembly and swap it out for the new hydraulic cylinder kit. Then install the pump inside the boat. All BMS’s hydraulic pumps are designed to mount inside for longevity and protection from the elements. Jack plates have “limited lifetime warranty”.

The Extreme Versa series jack plates are available in 4, 6, 8, 10 & 12″  setbacks to suit every application.

Predrilled for side mount shallow water anchors.

Jack plates are no longer just for fishing boats, offshore boaters will enjoy the extra speed, and increased fuel economy from BMS’s new line. Jack plates are used to improve an outboard boats speed, hole shot, fuel efficiency, and the boater navigate in shallow waters.  To help find the correct setback for your boat, give us a call!  813-247-7040

The post 10″ Extreme Gen 3 Versa Jac first appeared on Bob's Machine.

Bob’s Machine Shop has re engineered their world famous Versa jack for new 550+hp 1000LBS engines including V8’s. Bob’s Machine Shop’s Extreme Versa Jac jack plate line, offers new technology in the Jack Plate market.  The first & only jack plate to offer an upgrade kit for boaters to convert to Hydraulic at a later date!

Extreme jack plates are wider for Verado & Yamaha F-series with integrated steering.

Through innovative engineering, BMS’s new Extreme Gen3 Versa Series (TM) jack plates are their strongest yet. Adjusting the jack plate for optimum results is easily done while the boat is in the water. When it’s time to upgrade from manual to all-hydraulic operation, converting the jack is simple. Using a few basic hand tools, remove the Versajac’s manual screw assembly and swap it out for the new hydraulic cylinder kit. Then install the pump inside the boat. All BMS’s hydraulic pumps are designed to mount inside for longevity and protection from the elements. Jack plates have “limited lifetime warranty”.

The Extreme Versa series jack plates are available in 4, 6, 8, 10, 12, & 14″  setbacks to suit every application.

Predrilled for side mount shallow water anchors.

Jack plates are no longer just for fishing boats, offshore boaters will enjoy the extra speed, and increased fuel economy from BMS’s new line. Jack plates are used to improve an outboard boats speed, hole shot, fuel efficiency, and the boater navigate in shallow waters.  To help find the correct setback for your boat, give us a call!  1-813-247-7040

The post 4″ Extreme Gen 3 Versa Jac first appeared on Bob's Machine.